### Language Specification #lang ru_RU.KOI8-R lang en_US ### Network Configuration network --bootproto dhcp #network --bootproto static --ip 192.168.0.1 --netmask 255.255.254.0 --gateway 192.168.0.1 --nameserver 192.168.0.254 ### Source File Location #cdrom nfs --server porkchop.redhat.com --dir /mnt/dist/6.2/i386 ### Ethernet Device Configuration #device ethernet wd --opts "io=0x280, irq=3" ### Keyboard Configuration ### Will get set to 'us' by default ### if nothing specified in /etc/sysconfig/keyboard keyboard us ### Partitioning Information ### Whether to clear out the Master Boot Record (yes/no) ### Which partitions to format (--linux/--all) ### --linux - only format existing linux partitions ### --all - format all existing partitions ### Which partitions to set up on new system as well ### as size of those partitions zerombr yes clearpart --linux part /boot --size 16 part swap --size 127 part / --size 1000 --grow --maxsize 1400 #part raid.0 --size 80 #part raid.1 --size 80 #raid swap raid.0 raid.1 --level 1 --device md0 install ### Mouse Configuration ### Will only setup 3 types of mice ### generic - 2-button serial ### genericps/2 - 2-button ps/2 ### msintellips/2 - MS Intellimouse ### All three can be setup with or without 3-button ### emulation ### Run 'mouseconfig --help' in order to see other ### supported mouse type and make appropriate change ### NOTE: You will need to run 'mouseconfig' manually ### after installation if you have a non-ps/2 mouse ### and are installing X, as a ps/2 mouse is setup ### by default #mouse generic --device ttyS0 mouse generic3ps/2 ### Time Zone Configuration ### Will get set to 'US/Eastern' if ZONE is missing ### from /etc/sysconfig/clock or if file is missing entirely timezone --utc US/Eastern ### X Configuration ### Will set up system for minimal resolution and color depth; ### may wish to run Xconfigurator manually after system installation #xconfig --server "SVGA" --monitor "viewsonic g773" ### Root Password Designation ### '--iscrypted' does not work properly with release 6.1 as shipped; ### will need to get updates from http://support.redhat.com/errata ### in order for this to work correctly; can also just specify ### root password in plain text and change it after system installation; ### e.g. 'rootpw ThisIsThePassword' will get root's password to ### "ThisIsThePassword" rootpw paSSword ### Authorization Configuration #auth --useshadow --enablemd5 auth --enablemd5 ### Lilo Configuration ### Does not support pulling kernel 'append' arguments, but those ### can be added into config file using '--append' argument; ### e.g. 'lilo --append "mem=128M" --location mbr' will put the ### memory argument in the /etc/lilo.conf file at install lilo --location mbr #lilo --location none ### Package Designation ### The package names, as well as the groups they are a part of can be ### found in the /RedHat/base/comps file; individual packages can be ### specified by entering their names one per line; ### groups (e.g. 'X Window System') can be specified ### by appending a "@" in front of the group name; ### e.g. '@ X Window System' %packages python @ X Window System ### Commands To Be Run Post-Installation %post echo "This is in the chroot" > /tmp/message