Linux SMP HOWTO David Mentr, David.Mentre@irisa.fr v1.9, 13 January 2000 This HOWTO reviews main issues (and I hope solutions) related to SMP configuration under Linux. ______________________________________________________________________ Table of Contents 1. Introduction 2. Questions related to any architectures 2.1 Kernel Side 2.2 User Side 2.3 SMP Programming 2.3.1 Parallelization methods 2.3.2 The C Library 2.3.3 Languages, Compilers and debuggers 2.3.4 Other libraries 2.3.5 Other points about SMP Programming 3. x86 architecture specific questions 3.1 Why it doesn't work on my machine? 3.2 Possible causes of crash 3.3 Motherboard specific information 3.3.1 Motherboards with known problems 3.4 Low cost SMP Linux box (dual Celeron box) 3.4.1 Is it possible to run a dual Intel Celeron box ? 3.4.2 How does Linux behave on a dual Celeron system ? 3.4.3 Celeron processors are known to be easily overclockable. And dual Celeron system ? 3.4.4 And making a quad Celeron system ? 3.4.5 What about mixing Celeron and Pentium II processor ? 4. Sparc architecture specific questions 4.1 Which Sparc machines are supported ? 4.2 Specific problem related to Sparc SMP support 4.3 SMP specific limit with current kernel (2.2) 5. PowerPC architecture specific questions 5.1 Which PPC machines are supported ? 5.2 Specific problem related to PPC SMP support 6. Alpha architecture specific questions 6.1 Which Alpha machines are supported ? 6.2 Specific problem related to Alpha SMP support 7. Useful pointers 7.1 Various 7.2 Multithreaded programs and library 7.3 SMP specific patches 7.4 Parallelizing/Optimizing Compilers for 586/686 machines ( 8. Glossary 9. What's new ? 10. List of contributors ______________________________________________________________________ 11.. IInnttrroodduuccttiioonn Linux works on SMP (Symmetric Multi-Processors) machines. SMP support was introduced with kernel version 2.0, and has improved steadily ever since. The kernel locking granularity is much finer in 2.2.x than in 2.0.x, which enables better performance when processes are accessing the kernel! HOWTO maintained by David Mentr (David.Mentre@irisa.fr). The latest edition of this HOWTO can be found at +o http://www.irisa.fr/prive/mentre/smp-howto/ (France) +o http://www.phy.duke.edu/brahma/smp-faq/ (USA) If you want to contribute to this HOWTO, I would prefer a diff against the SGML version of this document, but any remarks (in plain text) will be greatly appreciated. If you send me an email about this HOWTO, please include a tag like [Linux SMP HOWTO] in the Subject: field of your e- mail. It helps me to automatically sort mails (and you will have a faster reply ;)). This HOWTO is an improvement of a first draft made by CChhrriiss PPiirriihh. All information contained in this HOWTO is provided "as is." All warranties, expressed, implied or statutory, concerning the accuracy of the information of the suitability for any particular use are hereby specifically disclaimed. While every effort has been taken to ensure the accuracy of the information contained in this HOWTO, the authors assume no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein. 22.. QQuueessttiioonnss rreellaatteedd ttoo aannyy aarrcchhiitteeccttuurreess 22..11.. KKeerrnneell SSiiddee 1. DDooeess LLiinnuuxx ssuuppppoorrtt mmuullttii--tthhrreeaaddiinngg?? IIff II ssttaarrtt ttwwoo oorr mmoorree pprroocceesssseess,, wwiillll tthheeyy bbee ddiissttrriibbuutteedd aammoonngg tthhee aavvaaiillaabbllee CCPPUUss?? Yes. Processes and kernel-threads are distributed among processors. User-space threads are not. 2. WWhhaatt kkiinndd ooff aarrcchhiitteeccttuurreess aarree ssuuppppoorrtteedd iinn SSMMPP?? FFrroomm AAllaann CCooxx: SMP is supported in 2.0 on the hypersparc (SS20, etc.) systems and Intel 486, Pentium or higher machines which are Intel MP1.1/1.4 compliant. RRiicchhaarrdd JJeelliinneekk adds: right now, systems have been tested up to 4 CPUs and the MP standard (and so Linux) theoretically allows up to 16 CPUs. SMP support for UltraSparc, SparcServer, Alpha and PowerPC machines is in available in 2.2.x. FFrroomm RRaallff BBcchhllee: MIPS, m68k and ARM does not support SMP; the latter two probly won't ever. That is, I'm going to hack on MIPS-SMP as soon as I get a SMP box ... 3. HHooww ddoo II mmaakkee aa LLiinnuuxx SSMMPP kkeerrnneell?? Most Linux distributions don't provide a ready-made SMP-aware kernel, which means that you'll have to make one yourself. If you haven't made your own kernel yet, this is a great reason to learn how. Explaining how to make a new kernel is beyond the scope of this document; refer to the Linux Kernel Howto for more information. (CC.. PPoolliisshheerr) In kernel series 2.0 up to but not including 2.1.132, uncomment the SMP=1 line in the main Makefile (/usr/src/linux/Makefile). In the 2.2 version, configure the kernel and answer "yes" to the question "Symmetric multi-processing support" (MMiicchhaaeell EElliizzaabbeetthh CChhaassttaaiinn). AND enable real time clock support by configuring the "RTC support" item (from RRoobbeerrtt GG.. BBrroowwnn). Note that inserting RTC support actually doesn't afaik prevent the known problem with SMP clock drift, but enabling this feature prevents lockup when the clock is read at boot time. A note from RRiicchhaarrdd JJeelliinneekk says also that activating the Enhanced RTC is necessary to get the second CPU working (identified) on some original Intel Mainboards. AND (x86 kernel) do NOT enable APM (advanced power management)! APM and SMP are not compatible, and your system will almost certainly (or at least probably ;)) crash while booting if APM is enabled (JJaakkoobb OOeesstteerrggaaaarrdd). AAllaann CCooxx confirms this : 2.1.x turns APM off for SMP boxes. Basically APM is undefined in the presence of SMP systems, and anything could occur. AND (x86 kernel) enable "MTRR (Memory Type Range Register) support". Some BIOS are buggy as they do not activate cache memory for the second processor. The MTRR support contains code that solves such processor misconfiguration. You must rebuild all your kernel and kernel modules when changing to and from SMP mode. Remember to make modules and make modules_install (from AAllaann CCooxx). If you get module load errors, you probably did not rebuild and/or re-install your modules. Also with some 2.2.x kernels people have reported problems when changing the compile from SMP back to UP (uni-processor). To fix this, save your .config file, do _m_a_k_e _m_r_p_r_o_p_e_r, restore your _._c_o_n_f_i_g file, then remake your kernel (_m_a_k_e _d_e_p, etc.) (WWaaddee HHaammppttoonn). Do not forget to run lilo after copying your new kernel. Recap: ___________________________________________________________________ make config # or menuconfig or xconfig make dep make clean make bzImage # or whatever you want # copy the kernel image manually then RUN LILO # or make lilo make modules make modules_install ___________________________________________________________________ 4. HHooww ddoo II mmaakkee aa LLiinnuuxx nnoonn-SMP kernel? In the 2.0 series, ccoommmmeenntt the SMP=1 line in the main Makefile (/usr/src/linux/Makefile). In the 2.2 series, configure the kernel and answer "no" to the question "Symmetric multi-processing support" (MMiicchhaaeell EElliizzaabbeetthh CChhaassttaaiinn). You must rebuild all your kernel and kernel modules when changing to and from SMP mode. Remember to make modules and make modules_install and remember to run lilo. See notes above about possible configuration problems. 5. HHooww ccaann II tteellll iiff iitt wwoorrkkeedd?? cat /proc/cpuinfo Typical output (dual PentiumII): ______________________________________________________________________ processor : 0 cpu : 686 model : 3 vendor_id : GenuineIntel [...] bogomips : 267.06 processor : 1 cpu : 686 model : 3 vendor_id : GenuineIntel [...] bogomips : 267.06 ______________________________________________________________________ 6. WWhhaatt iiss tthhee ssttaattuuss ooff ccoonnvveerrttiinngg tthhee kkeerrnneell ttoowwaarrdd ffiinneerr ggrraaiinneedd lloocckkiinngg aanndd mmuullttiitthhrreeaaddiinngg?? Linux kernel version 2.2 has signal handling, interrupts and some I/O stuff fine grain locked. The rest is gradually migrating. All the scheduling is SMP safe. Kernel version 2.3 (next 2.4) has really fine grained locking. In the 2.3 kernels the usage of the big kernel lock has basically disappeared, all major Linux kernel subsystems are fully threaded: networking, VFS, VM, IO, block/page caches, scheduling, interrupts, signals, etc. (IInnggoo MMoollnnaarr) 7. DDooeess LLiinnuuxx SSMMPP ssuuppppoorrtt pprroocceessssoorr aaffffiinniittyy?? SSttaannddaarrdd kkeerrnneell No and Yes. There is no way to force a process onto specific CPU's but the linux scheduler has a processor bias for each process, which tends to keep processes tied to a specific CPU. PPaattcchh Yes. Look at PSET - Processor Sets for the Linux kernel : The goal of this project is to make a source compatible and functionally equivalent version of pset (as defined by SGI - partially removed from their IRIX 6.4 kernel) for Linux. This enables users to determine which proces- sor or set of processors a process may run on. Possible uses include forcing threads to separate processors, tim- ings, security (a `root' only CPU?) and probably more. It is focused around the syscall sysmp(). This function takes a number of parameters that determine which function is requested. Functions include: +o binding a process/thread to a specific CPU +o restricting a CPU's ability to execute some processes +o restricting a CPU from running at all +o forcing a cpu to run _only_ one process (and its children) +o getting information about a CPU's state +o creating/destroying sets of processors, to which processes may be bound 8. WWhheerree sshhoouulldd oonnee rreeppoorrtt SSMMPP bbuuggss ttoo?? Please report bugs to linux-smp@vger.rutgers.edu. 9. WWhhaatt aabboouutt SSMMPP ppeerrffoorrmmaannccee?? If you want to gauge the performance of your SMP system, you can run some tests made by Cameron MacKinnon and available at http://www.phy.duke.edu/brahma/benchmarks.smp. 22..22.. UUsseerr SSiiddee 1. DDoo II rreeaallllyy nneeeedd SSMMPP?? If you have to ask, you probably don't. :) Generally, multi- processor systems can provide better performance than uni-processor systems, but to realize any gains you need to consider many other factors besides the number of CPU's. For instance, on a given system, if the processor is generally idle much of the time due to a slow disk drive, then this system is "input/output bound", and probably won't benefit from additional processing power. If, on the other hand, a system has many simultaneously executing processes, and CPU utilization is very high, then you are likely to realize increased system performance. SCSI disk drives can be very effective when used with multiple processors, due to the way they can process multiple commands without tying up the CPU. (CC.. PPoolliisshheerr) 2. DDoo II ggeett tthhee ssaammee ppeerrffoorrmmaannccee ffrroomm 22--330000 MMHHzz pprroocceessssoorrss aass ffrroomm oonnee 660000 MMHHzz pprroocceessssoorr?? This depends on the application, but most likely not. SMP adds some overhead that a faster uniprocessor box would not incur (WWaaddee HHaammppttoonn). :) 3. HHooww ddooeess oonnee ddiissppllaayy mmuuttiippllee ccppuu ppeerrffoorrmmaannccee?? Thanks to SSaammuueell SS.. CChheessssmmaann, here are some useful utilities: CChhaarraacctteerr bbaasseedd:: http://www.cs.inf.ethz.ch/~rauch/procps.html Basically, it's procps v1.12.2 (top, ps, et. al.) and some patches to support SMP. For 2.2.x, GGrreeggoorryy RR.. WWaarrnneess as made a patch available at http://queenbee.fhcrc.org/~warnes/procps GGrraapphhiicc:: xosview-1.5.1 supports SMP. And kernels above 2.1.85 (included) the cpuX entry in /proc/stat file. The official homepage for xosview is: http://lore.ece.utexas.edu/~bgrayson/xosview.html You'll find a version patched for 2.2.x kernels by KKuummssuupp LLeeee : http://www.ima.umn.edu/~klee/linux/xosview-1.6.1-5a1.tgz The various Forissier's kernel patches are at: http://www- isia.cma.fr/~forissie/smp_kernel_patch/ By the way, you can't monitor processor scheduling precisely with xosview, as xosview itself causes a scheduling perturbation. (HH.. PPeetteerr AAnnvviinn) 4. HHooww ccaann II eennaabbllee mmoorree tthhaann 11 pprroocceessss ffoorr mmyy kkeerrnneell ccoommppiillee?? use: ___________________________________________________________________ # make [modules|zImage|bzImages] MAKE="make -jX" where X=max number of processes. WARNING: This won't work for "make dep". ___________________________________________________________________ With a 2.2 like kernel, see also the file /usr/src/linux/Documentation/smp.txt for specific instruction. BTW, since running multiple compilers allows a machine with sufficient memory to use use the otherwise wasted CPU time during I/O caused delays, make MAKE="make -j 2" -j 2 actually helps even on uniprocessor boxes (from RRaallff BBcchhllee). 5. WWhhyy iiss tthhee ttiimmee ggiivveenn bbyy tthhee time command inaccurate? (from JJooeell MMaarrcchhaanndd) In the 2.0 series, the result given by the time command is false. The sum user+system is right *but* the spreading between user and system time is false. More precisely: "The explanation is, that all time spent in processors other than the boot cpu is accounted as system time. If you time a program, add the user time and the system time, then you timing will be almost right, except for also including the system time that is correctly accounted for" (JJaakkoobb sstteerrggaaaarrdd). This bug is corrected in 2.2 kernels. 22..33.. SSMMPP PPrrooggrraammmmiinngg Section by JJaakkoobb sstteerrggaaaarrdd. This section is intended to outline what works, and what doesn't when it comes to programming multi-threaded software for SMP Linux. 22..33..11.. PPaarraalllleelliizzaattiioonn mmeetthhooddss 1. POSIX Threads 2. PVM / MPI Message Passing Libraries 3. fork() -- Multiple processes Since both fork() and PVM/MPI processes usually do not share memory, but either communicate by means of IPC or a messaging API, they will not be described further in this section. They are not very specific to SMP, since they are used just as much - or more - on uniprocessor computers, and clusters thereof. Only POSIX Threads provide us with multiple threads sharing ressources like - especially - memory. This is the thing that makes a SMP machine special, allowing many processors to share their memory. To use both (or more ;) processors of an SMP, use a kernel-thread library. A good library is the LinuxThreads, a pthread library made by Xavier Leroy which is now integrated with glibc2 (aka libc6). Newer Linux distributions include this library by default, hence you do not have to obtain a separate package to use kernel threads. There are implementations of threads (and POSIX threads) that are application-level, and do not take advantage of the kernel-threading. These thread packages keep the threading in a single process, hence do not take advantage of SMP. However, they are good for many applications and tend to actually run faster than kernel-threads on single processor systems. Multi-threading has never been really popular in the UN*X world though. For some reason, applications requiring multiple processes or threads, have mostly been written using fork(). Therefore, when using the thread approach, one runs into problems of incompatible (not thread-ready) libraries, compilers, and debuggers. GNU/Linux is no exception to this. Hopefully the next few sections will sched a little light over what is currently possible, and what is not. 22..33..22.. TThhee CC LLiibbrraarryy Older C libraries are not thread-safe. It is very important that you use GNU LibC (gglliibbcc), also known as lliibbcc66. Earlier versions are, of course possible to use, but it will cause you much more trouble than upgrading your system will, well probably :) If you want to use GDB to debug your programs, see below. 22..33..33.. LLaanngguuaaggeess,, CCoommppiilleerrss aanndd ddeebbuuggggeerrss There is a wealth of programming languages available for GNU/Linux, and many of them can be made to use threads one way or the other (some languages like Ada and Java even have threads as primitives in the language). This section will, however, currently only describe C and C++. If you have experience in SMP Programming with other languages, please enlighten us. GNU C and C++, as well as the EGCS C and C++ compilers work with the thread support from the standard C library (gglliibbcc). There are however a few issues: 1. When compiling C or C++, use the --DD__RREEEENNTTRRAANNTT define in the compiler command line. This is necessary to make certain error- handling functions work like the errno variable. 2. When using C++, If two threads throw exceptions concurrently, the program will segfault. The compiler does not generate thread-safe exception code. The workaround is to put a pthread_mutex_lock(&global_exception_lock) in the constructor(s) of every class you throw(), and to put the corresponding pthread_mutex_unlock(...) in the destructor. It's ugly, but it works. This solution was given by MMaarrkkuuss FFeerrcchh. The GNU Debugger GGDDBB as of version 4.18, should handle threads correctly. Most Linux distribution offer a patched, thread-aware gdb. It is not necessary to patch gglliibbcc in any way just to make it work with threads. If you do not need to debug the software (this could be true for all machines that are not development workstations), there is no need to patch gglliibbcc. Note that core-dumps are of no use when using multiple threads. Somehow, the core dump is attached to one of the currently running threads, and not to the program as a whole. Therefore, whenever you are debugging anything, run it from the debugger. HHiinntt:: If you have a thread running haywire, like eating 100% CPU time, and you cannot seem to figure out why, here is a nice way to find out what's going on: Run the program straight from the shell, no GDB. Make the thread go haywire. Use ttoopp to get the PID of the process. Run GDB like ggddbb pprrooggrraamm ppiidd. This will make GDB attach itself to the process with the PID you specified, and stop the thead. Now you have a GDB session with the offending thread, and can use bbtt and the like to see what is happening. 22..33..44.. OOtthheerr lliibbrraarriieess EElleeccttrriiccFFeennccee:: This library is not thread safe. It should be possible, however, to make it work in SMP environments by inserting mutex locks in the ElectricFence code. 22..33..55.. OOtthheerr ppooiinnttss aabboouutt SSMMPP PPrrooggrraammmmiinngg 1. WWhheerree ccaann II ffoouunndd mmoorree iinnffoorrmmaattiioonn aabboouutt ppaarraalllleell pprrooggrraammmmiinngg?? Look at the Linux Parallel Processing HOWTO Lots of useful information can be found at Parallel Processing using Linux Look also at the Linux Threads FAQ 2. AArree tthheerree aannyy tthhrreeaaddeedd pprrooggrraammss oorr lliibbrraarriieess?? Yes. For programs, you should look at: Multithreaded programs on linux (I love hyperlinks, did you know that ? ;)) As far as library are concerned, there are: OOppeennGGLL MMeessaa lliibbrraarryy Thanks to DDaavviidd BBuuccccaarreellllii, AAnnddrreeaass SScchhiifffflleerr and EEmmiill BBrriiggggss, it exists in a multithreaded version (right now [1998-05-11], there is a working version that provides speedups of 5-30% on some OpenGL benchmarks). The multithreaded stuff is now included in the regular Mesa distribution as an experimental option. For more information, look at the Mesa library BBLLAASS Pentium Pro Optimized BLAS and FFTs for Intel Linux Multithreaded BLAS routines are not available right now, but a dual proc library is planned for 1998-05-27, see Blas News for details. TThhee GGIIMMPP EEmmiill BBrriiggggss, the same guy who is involved in multithreaded Mesa, is also working on multithreaded The GIMP plugins. Look at http://nemo.physics.ncsu.edu/~briggs/gimp/index.html for more info. 33.. xx8866 aarrcchhiitteeccttuurree ssppeecciiffiicc qquueessttiioonnss 33..11.. WWhhyy iitt ddooeessnn''tt wwoorrkk oonn mmyy mmaacchhiinnee?? 1. CCaann II uussee mmyy CCyyrriixx//AAMMDD//nnoonn--IInntteell CCPPUU iinn SSMMPP?? SShhoorrtt aannsswweerr:: no. LLoonngg aannsswweerr:: Intel claims ownership to the APIC SMP scheme, and unless a company licenses it from Intel they may not use it. There are currently no companies that have done so. (This of course can change in the future) FYI - Both Cyrix and AMD support the non- proprietary OpenPIC SMP standard but currently there are no motherboards that use it. 2. WWhhyy ddooeessnn''tt mmyy oolldd CCoommppaaqq wwoorrkk?? Put it into MP1.1/1.4 compliant mode. check "Configure Hardware" -> "View / Edit details" -> "Advanced mode" (F7 I think) for a configuration option "APIC mode" and set this to "full Table mode". This is an official Compaq recommandation. (DDaanniieell RRooeesseenn) (AAddrriiaann PPoorrtteellllii)To do this: a. Press F10 when the server boots to enter the System Configuration Utility b. Press Enter to dismiss the splash screen c. Immediately press CTRL+A d. A message will appear informing you that you are now in "Advanced Mode" e. Then select "Configure Hardware" -> "View / Edit details" f. You will then see the advanced settings (intermixed with the ordinary ones) g. Stroll down to "APIC Mode" and then select "Fully Mapped" h. Save changes and reboot 3. WWhhyy ddooeessnntt mmyy AALLRR wwoorrkk?? From RRoobbeerrtt HHyyaatttt : ALR Revolution quad-6 seems quite safe, while some older revolution quad machines without P6 processors seem "iffy"... 4. WWhhyy ddooeess SSMMPP ggoo ssoo sslloowwllyy?? or WWhhyy ddooeess oonnee CCPPUU sshhooww aa vveerryy llooww bbooggoommiippss vvaalluuee wwhhiillee tthhee ffiirrsstt oonnee iiss nnoorrmmaall?? From AAllaann CCooxx: If one of your CPU's is reporting a very low bogomips value the cache is not enabled on it. Your vendor probably provides a buggy BIOS. Get the patch to work around this or better yet send it back and buy a board from a competent supplier. A 2.0 kernel (> 2.0.36) contains the MTRR patch which should solve this problem (select option "Handle buggy SMP BIOSes with bad MTRR setup" in the "General setup" menu). I think buggy SMP BIOS handling is automatic in latest 2.2 kernels. 5. II''vvee hheeaarrdd IIBBMM mmaacchhiinneess hhaavvee pprroobblleemmss Some IBM machines have the MP1.4 bios block in the EBDA, allowed but not supported below 2.2 kernels. There is an old 486SLC based IBM SMP box. Linux/SMP requires hardware FPU support. 6. IIss tthheerree aannyy aaddvvaannttaaggee ooff IInntteell MMPP 11..44 oovveerr 11..11 ssppeecciiffiiccaattiioonn?? Nope (according to Alan :) ), 1.4 is just a stricker specs of 1.1. 7. WWhhyy ddooeess tthhee cclloocckk ddrriifftt ssoo rraappiiddllyy wwhheenn II rruunn lliinnuuxx SSMMPP?? This is known problem with IRQ handling and long kernel locks in the 2.0 series kernels. Consider upgrading to a later 2.2 kernel. From JJaakkoobb OOeesstteerrggaaaarrdd: Or, consider running xntpd. That should keep your clock right on time. (I think that I've heard that enabling RTC in the kernel also fixes the clock drift. It works for me! but I'm not sure whether that's general or I'm just being lucky) There are some kernel fixes in the later 2.2.x series that may fix this. 8. WWhhyy aarree mmyy CCPPUU''ss nnuummbbeerreedd 00 aanndd 22 iinnsstteeaadd ooff 00 aanndd 11 ((oorr ssoommee ootthheerr oodddd nnuummbbeerriinngg))?? The CPU number is assigned by the MB manufacturer and doesn't mean anything. Ignore it. 9. MMyy qquuaadd--XXeeoonn ssyysstteemm hhaannggss aass ssoooonn aass iitt hhaass ddeeccoommpprreesssseedd tthhee kkeerrnneell (DDoouugg LLeeddffoorrdd) Try recompiling LILO with LARGE_EBDA support and then making sure to always use make bzImage when compiling the kernel. That appears to have fixed the SMP boot hangs here on Intel multi-Xeon boards. However, please note that this also appears to break LILO in that the root= option no longer works, so make sure you rdev your kernel image at the same time you run lilo to make sure that the kernel loads the correct root filesystem at boot. (RRoobbeerrtt MM.. HHyyaatttt) With 3 cpus, do you have a terminator in the 4th slot? 10. DDuurriinngg bboooott mmaacchhiinnee hhaanngg ssiiggnnaalliinngg aann IIOOAAPPIICC pprroobblleemm Try boot options "noapic" (JJoohhnn AAllddrriicchh) and/or "reboot=bios" (TTeerrrryy SShhuullll). 11. MMyy ssyysstteemm lloocckkss uupp dduurriinngg hheeaavvyy NNFFSS ttrraaffffiicc Try the later 2.2.x kernels and the knfsd patches. This is currently under investigation. (WWaaddee HHaammppttoonn) 12. MMyy ssyysstteemm lloocckkss uupp wwiitthh nnoo ooooppss mmeessssaaggeess If you are using kernels 2.2.11 or 2.2.12, get the latest kernel. For example 2.2.13 has a number of SMP fixes. Several people have reported these kernels to be unstable for SMP. These same kernels may have NFS problems that can cause lockups. Also, use a serial console to capture your oops messages. (WWaaddee HHaammppttoonn) If the problem remains (and the other suggestions on this list didn't help either), then you could try the latest 2.3 kernels. They have more verbose (and more robust) SMP/APIC code, and automatic hard-lockup-prevention code which will produce meaningful oopses instead of a silent hang. (IInnggoo MMoollnnaarr) (OOssaammuu AAookkii) You MUST also _d_i_s_a_b_l_e all BIOS related power save features. Example of good configuration (Dual Celeron 466 Abit BP6): ___________________________________________________________________ POWER MANAGEMENT SETUP. ACPI: Disabled POWER MANAGEMENT: Disabled PM CONTROL by APM: No ___________________________________________________________________ If power management features are activated, some random freeze can occur. 13. DDeebbuuggggiinngg lloocckkuuppss (item by WWaaddee HHaammppttoonn) A good means of debugging lockups is to get the ikd patch from Andrea Arcangeli: ftp://ftp.suse.com/pub/people/andrea/kernel- patches There are several of debug options, but do NOT use the soft lockup option! For newer SMP boxes, turn kernel debugging then turn on the NMI oopser. To verify that the NMI oopser is working, after booting the new kernel, /cat /proc/interrupts and verify that you are getting NMIs. When the box locks up, you should get an OOPS. You may also try the %eip option. This allows the kernel to print on the console the %eip address every time a kernel function is called. When the box locks up, write down the first column ordered by the second column then lookup the addresses in the System.map file. This works only in console mode. Also note that the use of a serial console can greatly facilitate debugging kernel lockups, not just SMP kernel lockups! 14. ""AAPPIICC eerrrroorr iinntteerrrruupptt oonn CCPPUU##nn,, sshhoouulldd nneevveerr hhaappppeenn"" mmeessssaaggeess iinn llooggss A message like: ___________________________________________________________________ APIC error interrupt on CPU#0, should never happen. ... APIC ESR0: 00000002 ... APIC ESR1: 00000000 ___________________________________________________________________ indicates a 'receive checksum error'. This cannot be caused by Linux as the APIC message checksumming part is completely in hardware. It might be marginal hardware. As long as you dont see any instability, they are not a problem - APIC messages are retried until delivered. (IInnggoo MMoollnnaarr) 33..22.. PPoossssiibbllee ccaauusseess ooff ccrraasshh In this section you'll find some ppoossssiibbllee reasons for a crash of an SMP machine (credits are due to JJaakkoobb sstteerrggaaaarrdd for this part). As far as I (David) know, theses problems are Intel specific. +o CCoooolliinngg pprroobblleemmss From RRaallff BBcchhllee: [Related to case size and fans] It's important that the air is flowing. It of course can't where cables etc. are preventing this like in too small cases. On the other side I've seen oversized cases causing big problems. There are some tower cases on the market that actually are worse for cooling than desktops. In short, the right thing is thinking about aerodynamics in the case. Extra cases for hot peripherals are usefull as well. Of course you can always go to Radio Shack (or similar) and get another fan. You can use the lm_sensors to monitor the CPU temperature of newer PII and PIII processors. This might help you to determine if heat is a problem. (WWaaddee HHaammppttoonn) +o BBaadd mmeemmoorryy Don't buy cheap RAM and don't use mixed RAM modules on a motherboard that is picky about it. Especially Tyan motherboards are known to be picky about RAM speed (see the Tyan paragraph below for a possible solution). There have been some report of 10ns PC100 RAM being sold with motherboards where the CPU really needs 8ns RAM. (WWaaddee HHaammppttoonn) +o BBaadd ccoommbbiinnaattiioonn ooff ddiiffffeerreenntt sstteeppppiinngg CCPPUUss Check /proc/cpuinfo to see that your CPUs are same stepping. +o IIff yyoouurr ssyysstteemm iiss uunnssttaabbllee,, tthheenn DDOONN''TT oovveerrcclloocckk iitt!! ...and even if it is stable, DON'T overclock. From RRaallff BBcchhllee: Overclocking causes very subtle problems. I have a nice example, one of my overclocked old machines misscomputes a couple of pixels of a 640 x 400 fractal. The problem is only visible when comparing them using tools. So better say _n_e_v_e_r_, _n_u_n_c_a_s_, _j_a_m_a_i_s_, _n_i_e_m_a_l_s overclock. +o 22..00..xx kkeerrnneell aanndd ffaasstt eetthheerrnneett (from RRoobbeerrtt GG.. BBrroowwnn) 2.0.x kernels on high performance fast ethernet systems have significant (and known) problems with a race/deadlock condition in the networking interrupt handler. The solution is to get the latest 100BT development drivers from CESDIS Linux Ethernet device drivers site (ones that define SMPCHECK). +o AA bbuugg iinn tthhee 444400FFXX cchhiippsseett (from EEmmiill BBrriiggggss) If you had a system using the 440FX chipset then your problem with the lockups was possibly due to a documented errata in the chipset. Here is a reference References: Intel 440FX PCIset 82441FX (PMC) and 82442FX (DBX) Specification Update. pg. 13 http://www.intel.com/design/pcisets/specupdt/297654.htm The problem can be fixed with a BIOS workaround (Or a kernel patch) and in fact David Wragg wrote a patch that's included with Richard Gooch's MTTR patch. For more information and a fix look here: http://nemo.physics.ncsu.edu/~briggs/vfix.html +o DDOONNTT rruunn eemmmm338866..eexxee bbeeffoorree bboooottiinngg lliinnuuxx SSMMPP From MMaarrkk DDuugguuiidd, dumb rule #1 with W6LI motherboards. ;) +o IIff tthhee mmaacchhiinnee rreebboooottss//ffrreeeezzeess aafftteerr aa wwhhiillee,, tthheerree ccaann bbee ttwwoo ggoooodd BBIIOOSS ++ mmeemmoorryy rreellaatteedd rreeaassoonnss (from JJaakkoobb sstteerrggaaaarrdd) +o If the BIOS has settings like "memory hole at 16M" and/or "OS/2 memory > 64MB", try disabling them both. Linux does not always react well with theese options. +o If you have more than 64 MB of memory in the machine, and you specified the exact number manually in the LILO configuration, you should specify one MB less than you actually have in the machine. If you have 128 MB, you lilo.conf line looks like: append="mem=127M" +o BBee aawwaarree ooff IIRRQQ rreellaatteedd pprroobblleemmss Sometime, some cards are not recognized or can trigger IRQ conflicts. Try shuffling cards on slots in different ways and possibly moving them to different IRQs. Contributed by hhAASSCCIIII : removing an " append="hisax=9,2,3"" line in lilo.conf allowed using a kernel from the 2.1.xx series with activated ISDN + Hisax support. Kernels from the 2.0.xx series doesn't make problems like this. Try also to set BIOS setup option like "MP 1.4 mode" or "route PCI interrupts through IOAPIC", or "OS Type" not set to DOS neither Novell (IInnggoo MMoollnnaarr). +o FFllooppppyy aacccceessss wwhhiillee ssoouunndd iiss aaccttiivvee If you lockup when trying to access the floppy (for example while sound is playing) you may have to edit drivers/pci/quirks.c and set /int isa_dma_bridge_buggy = 1; This is a problem with my Dell WS400 dual PII/300, 2.2.x, SMP (WWaaddee HHaammppttoonn). 33..33.. MMootthheerrbbooaarrdd ssppeecciiffiicc iinnffoorrmmaattiioonn _P_l_e_a_s_e _n_o_t_e: Some more specific information can be found with the list of Motherboards rumored to run Linux SMP 33..33..11.. MMootthheerrbbooaarrddss wwiitthh kknnoowwnn pprroobblleemmss +o none right now 33..44.. LLooww ccoosstt SSMMPP LLiinnuuxx bbooxx ((dduuaall CCeelleerroonn bbooxx)) (SSttpphhaannee ccoolliivveett) The lowest cost SMP Linux boxes with nowadays buyable processors are dual Celeron systems. Such a system is not officially possible according to Intel. Better think about the second generation of Celeron, those with 128 Kb L2 cache. 33..44..11.. IIss iitt ppoossssiibbllee ttoo rruunn aa dduuaall IInntteell CCeelleerroonn bbooxx ?? OOffffiicciiaall aannsswweerr ffrroomm IInntteell:: no, Celeron cannot work in SMP mode. PPrraaccttiiccaall aannsswweerr:: it is possible, but requires hardware alteration for Slot 1 processors. Alteration is described by Tomohiro Kawada on his Dual Celeron System page. Of course, this kind of modification removes warranties... Some versions of Celeron processor are also available in Socket 370 format. In that case, alteration may just be done on the Socket 370 to Slot 1 adapter or may even be sold pre-wired for SMP use. (AAnnddyy PPoolliinngg, HHaannss -- EErriikk SSkkyyttttbbeerrgg, JJaammeess BBeeaarrdd) There is also a motherboard (ABIT BP6) allowing two Celerons in Socket 370 format to be inserted (MMaarrttiijjnn KKrruuiitthhooff, RRyyaann MMccCCuuee). ABIT Computer BP6 verified tested and native to linux with dual ppga socket 370 (AAnnddrree HHeeddrriicckk). 33..44..22.. HHooww ddooeess LLiinnuuxx bbeehhaavvee oonn aa dduuaall CCeelleerroonn ssyysstteemm ?? Fine, thank you. 33..44..33.. CCeelleerroonn ssyysstteemm ?? CCeelleerroonn pprroocceessssoorrss aarree kknnoowwnn ttoo bbee eeaassiillyy oovveerrcclloocckkaabbllee.. AAnndd dduuaall It mmaayy work. However, overclocking this kind of system is not as easy as overclocking a mono-processor one. It is definitly not a good idea for a production system. For personal use, dual Celeron 300A systems running rock-solid at 450 MHz have been reported. (nnuummeerroouuss ppeeooppllee) 33..44..44.. AAnndd mmaakkiinngg aa qquuaadd CCeelleerroonn ssyysstteemm ?? It is impossible. Celeron processors have nearly the same features as basic Pentium II chips. If you want more than 2 processors in your system, you'll have to look at Pentium Pro, Pentium II Xeon or Pentium III (?) boxes. 33..44..55.. WWhhaatt aabboouutt mmiixxiinngg CCeelleerroonn aanndd PPeennttiiuumm IIII pprroocceessssoorr ?? A system using a "re-enable" Celeron processor and a Pentium II processor with the same steppings mmaayy tthheeoorriiccaallllyy work. AAlleexxaannddrree CChhaarrbbeeyy as made such a system: +o Asus P2B-D motherboard, proc 1: Celeron 366, proc 2: Pentium II 400@266 +o 66Mhz and 75Mhz bus frenquencies where functionnal +o the fastest processor (in this case the Celeron) should be put on the second slot. Swapping processors (fatest first) leads to quick failure. 44.. SSppaarrcc aarrcchhiitteeccttuurree ssppeecciiffiicc qquueessttiioonnss 44..11.. WWhhiicchh SSppaarrcc mmaacchhiinneess aarree ssuuppppoorrtteedd ?? Quoting the UltraLinux web page (only SMP systems): +o UltraSPARC PCI based workstations: Ultra60, Ultra450 +o UltraSPARC SBUS based servers: Enterprise 1, 2, 150 +o UltraSPARC SBUS based large servers: Enterprise 3000, 4000, 5000, 6000, 10000 +o UltraSPARC PCI based servers: Enterprise 250, 450 +o SPARC sun4m SMP machines (AAnnttoonn BBllaanncchhaarrdd) UltraLinux has ran on a 14 CPUs machine (see the dmesg output ). 44..22.. SSppeecciiffiicc pprroobblleemm rreellaatteedd ttoo SSppaarrcc SSMMPP ssuuppppoorrtt (DDaavviidd MMiilllleerr) There should not be any worries. The only known problem, and one we don't intend to fix, is that if you build an SMP kernel for 32-bit (ie. non-ultrasparc) systems, this kernel will not work on sun4c systems. 44..33.. SSMMPP ssppeecciiffiicc lliimmiitt wwiitthh ccuurrrreenntt kkeerrnneell ((22..22)) (DDaavviidd MMiilllleerr) There is a bug in the include/linux/tasks.h header file, it needs to define NR_CPUS to 64 on UltraSparc as this is the upper limit for the hardware we support :-) 55.. PPoowweerrPPCC aarrcchhiitteeccttuurree ssppeecciiffiicc qquueessttiioonnss 55..11.. WWhhiicchh PPPPCC mmaacchhiinneess aarree ssuuppppoorrtteedd ?? +o PowerSurge boards (including UMAX s900) +o PowerMac +o Motorola MTX: support under developement. Patches not yet integrated into the main kernel (TTrrooyy BBeennjjeeggeerrddeess) (CCoorrtt DDoouuggaann) Not supported: PPC RS/6000 systems 55..22.. SSppeecciiffiicc pprroobblleemm rreellaatteedd ttoo PPPPCC SSMMPP ssuuppppoorrtt Nothing. Usual SMP compiling (see above). As usual, be aware, modules are specific either for UP or SMP. Recompile them. (PPaauull MMaacckkeerrrraass) 66.. AAllpphhaa aarrcchhiitteeccttuurree ssppeecciiffiicc qquueessttiioonnss 66..11.. WWhhiicchh AAllpphhaa mmaacchhiinneess aarree ssuuppppoorrtteedd ?? (GGeeeerrtteenn KKuuiippeerr) SMP works for most, if not all, AXP servers. (JJaayy AA EEssttaabbrrooookk) SMP does seem to work on most of our [Compaq] boxes with 2 or more CPUs. That includes : +o AS2000/2100 (SABLE) +o AS4000/4100 (RAWHIDE) +o DS20 (DP264) It does not include : +o AS2100A (LYNX) +o TurboLaser bigboys (8200/8400) 66..22.. SSppeecciiffiicc pprroobblleemm rreellaatteedd ttoo AAllpphhaa SSMMPP ssuuppppoorrtt None (really ? :-) 77.. UUsseeffuull ppooiinntteerrss 77..11.. VVaarriioouuss +o Parallel Processing using Linux +o Linux Parallel Processing HOWTO +o ((oouuttddaatteedd)) Linux SMP home page +o linux-smp mailing list To ssuubbssccrriibbee, send subscribe linux-smp in the message body at majordomo@vger.rutgers.edu To uunnssuubbssccrriibbee, send unsubscribe linux-smp in the message body at majordomo@vger.rutgers.edu Linux SMP archives Linux SMP archives at progressive-comp.com +o pthread library made by Xavier Leroy +o Motherboards rumored to run Linux SMP +o procps +o procps patch for 2.2.x +o xosview +o xosview for 2.2.x +o SMP Performance of Linux +o CESDIS Linux Ethernet device drivers site +o Dual Celeron System 77..22.. MMuullttiitthhrreeaaddeedd pprrooggrraammss aanndd lliibbrraarryy +o Linux Threads FAQ +o Multithreaded programs on linux +o Pentium Pro Optimized BLAS and FFTs for Intel Linux (not available right now, but a dual proc library is planned for 5/27/98, see Blas News for details) +o Mesa library (with experimental multi-threading) +o Parallel plugins for The GIMP 77..33.. SSMMPP ssppeecciiffiicc ppaattcchheess +o Forissier kernel patches +o Patch for a bug in the 440FX chipset +o MTRR patch (latest version: 1.9) +o PSET - Processor Sets for the Linux kernel +o Ingo Molnar SMP patches (for experts only, please read linux-smp@vger.rutgers.edu) 77..44.. (( SSuummiitt RRooyy )) PPaarraalllleelliizziinngg//OOppttiimmiizziinngg CCoommppiilleerrss ffoorr 558866//668866 mmaacchhiinneess +o Pentium Compiler Group creators of pgcc +o Absoft , Fortran 90 and Fortran 77 compilers +o The Portland Group, Inc. , supports the OpenMP standard for Fortran parallelization on Linux +o Pacific-Sierra Research Corporation , has a free F90 compiler for Linux, as well as parallelizing compilers for SMP Linux +o Applied Parallel Research , currently have parallelizing compilers for WinNT +o KAI has a C++-Compiler for Linux, that understands OpenMPI. It is called Guide_OpenMP. Info under http://www.kai.com/parallel/kappro/guide. (GGeerroo WWeeddeemmaannnn) 88.. GGlloossssaarryy +o SSMMPP Symmetric Multi-Processors +o AAPPIICC Advanced Programmable Interrupt Controler +o tthhrreeaadd A thread is a processor activity in a process. The same process can have multiple threads. Those threads share the process address space and can therefore share data. +o pptthhrreeaadd Posix thread, threads defined by the Posix standard. +o AAPPMM Advanced Power Managment 99.. WWhhaatt''ss nneeww ?? vv11..99,, 1133 jjaannuuaarryy 22000000 +o Remember to disable all BIOS power-save features (OOssaammuu AAookkii) +o Explain how to access to Compaq server into advanced configuration mode (AAddrriiaann PPoorrtteellllii) vv11..88,, 88 nnoovveemmbbeerr 11999999 +o quad-celeron motherboard was a hoax, restored old paragraph (SSiimmeenn TTiimmiiaann TThhoorreesseenn) vv11..77,, 66 nnoovveemmbbeerr 11999999 +o new introduction (CC.. PPoolliisshheerr aka cp) +o numerous typo and grammatical fixes (cp) +o introductory paragraph on kernel compilation (cp) +o introductory paragraph on SMP need (cp) +o reference on KAI optimizing compiler (GGeerroo WWeeddeemmaannnn) +o quad-celeron motherboard exists (JJeeffffrreeyy HH.. IInnggbbeerr) vv11..66,, 2211 ooccttoobbeerr 11999999 +o added information on xosview scheduling perturbation +o added "APIC error interrupt on CPU#n" message information +o added information on hard lockup +o deleted section "How to optain maximum performance" (was obsolete) +o added info on dual systems with different x86 procs (a Celeron and a P-II) vv11..55,, 44 ooccttoobbeerr 11999999 +o more precision in PSET description vv11..44,, 3300 sseepptteemmbbeerr 11999999 +o precize to enable MTRR support for an x86 SMP kernel (me) vv11..33,, 2299 sseepptteemmbbeerr 11999999 +o many many grammar and typographical fixes (WWaaddee HHaammppttoonn aka hww) +o added info in short introduction related to 2.2/2.4/2.0 diffs (hww) +o added step by step things to do to recompile a kernel (hww and me) +o added info related to SMP/UP modules problems (hww) +o added precision in Posix Threads section related to user (hww) vs. kernel threads (hww) +o new item about NFS and kernel lock (hww) +o new item about kernel lock without message (hww) +o new item about debugging lockup problems (hww) +o added info about heating problems (hww) +o miscellaneous updates I've forget about (hww) +o new item about floppy access and sound (hww) vv11..22,, 2277 sseepptteemmbbrree 11999999 +o name change: this document is now a HOWTO. TWD, and fast! (GGuuyyllhheemm AAzznnaarr) vv11..11,, 2266 sseepptteemmbbrree 11999999 +o added a link to first Chris Pirih FAQ draft +o expanted an IRQ related problems vv11..0000,, 2255 sseepptteemmbbrree 11999999 +o first upgrade in a long long time! +o reprocessed the whole FAQ: 2.2 is here and 2.4 soon +o added kernel locking information from Ingo Molnar +o deleted item "How will my application perform under SMP?": outdated +o deleted item "My SMP system is locking up all the time.": outdated +o deleted item "You are running 2.0.35 aren't you ?": outdated +o deleted item "Some hardware is also known to cause problems.": outdated +o blanked section "Motherboards with known problems". We should restart from scratch +o deleted section "Motherboards with NO known problems": outdated +o updated dual celeron section (numerous people) +o added "SPARC sun4m SMP machines" to supported SMP sparc machines (AAnnttoonn BBllaanncchhaarrdd) +o added a "During boot machine hang signaling an IOAPIC problem" item in "Why it doesn't work on my machine?" section +o added a "What about SMP performances?" item +o updated "Why doesn't my old Compaq work?" item +o fixed an outdated pointer +o added a pointer to Ingo test SMP patches vv00..5544,, 1133 mmaarrcchh 11999999 +o Added a section about SMP Alpha systems vv00..5533,, 0088 mmaarrcchh 11999999 +o Added a section about SMP PowerPC systems vv00..5522,, 0077 mmaarrcchh 11999999 +o Added a section about SMP Sparc systems vv00..5511,, 0066 mmaarrcchh 11999999 +o Added a dual-celeron section +o Deleted Adaptec section +o Updated procps link +o Updated xosview link +o Added an answer for quad Xeon boot hang +o Updated item about glibc patch for gd: should be included in RH 5.2 vv00..5500,, 0033 ffeebbrruuaarryy 11999999 +o Updated "Multithreaded programs on linux" link vv00..4499,, 1133 jjaannuuaarryy 11999999 +o Update about CONFIG_SMP. Added .txt to Documentation/smp. (MMiicchhaaeell EElliizzaabbeetthh CChhaassttaaiinn) vv00..4488,, 1100 ddeecceemmbbeerr 11999988 +o Mispelled corrected. Email address corrected. vv00..4477,, 2200 nnoovveemmbbeerr 11999988 +o Added that 2.0.36 as the MTRR patch (related to the BogoMips problem) vv00..4466,, 1100 nnoovveemmbbeerr 11999988 +o Update about Epox KP6-LS motherboards vv00..4455,, 2255 ooccttoobbeerr 11999988 +o Corrected an error regarding /proc/stat file +o Added a pointer to CESDIS Ethernet Linux Drivers site vv00..4444,, 1144 ooccttoobbeerr 11999988 +o Updated the link to the web page: _M_o_t_h_e_r_b_o_a_r_d_s _r_u_m_o_r_e_d _t_o _r_u_n _L_i_n_u_x _S_M_P +o Added Jakob explanation how to time SMP systems with 2.0 kernels vv00..4433,, 99 sseepptteemmbbeerr 11999988 +o Updated first question in section 3.1 +o Updated mt-Mesa link: multi-threaded is now included as experimental in the Mesa distribution vv00..4422,, 22 sseepptteemmbbeerr 11999988 +o Minor cosmetic update in sect 3.3 +o Two links (multithreaded Mesa and SMP performance) marked outdated +o Updated the item about threads and exceptions in C++ (sect 3.3) vv00..4411,, 11 sseepptteemmbbeerr 11999988 +o Added a major section: "3.3 SMP Programming" written by Jakob stergaard +o moved some item of section "3.2 User side" in sect 3.3 vv00..4400,, 2277 aauugguusstt 11999988 +o Updated section 3.1, item 7: processor affinity vv00..3399,, 2277 aauugguusstt 11999988 +o Updated needed Award BIOS version for Tyan motherboards (hhAASSCCIIII) +o Added an item on IRQ in the crash section (me and hhAASSCCIIII) +o Added good support of Asus P2B-DS (UUllff RRoommppee) +o Added another smp-list archive in pointer section (HHaannkk LLeeiinniinnggeerr) vv00..3388,, 88 aauugguusstt 11999988 +o Added a pointer to the Linux Threads FAQ vv00..3377,, 3300 JJuullyy 11999988 +o EEmmiill BBrriiggggss is working on parallel plugins for Gimp (see "Is there any threaded programs or library?", sect. "User side") vv00..3366,, 2266 JJuullyy 11999988 +o Thanks to JJaakkoobb sstteerrggaaaarrdd, two changes in "Possible causes of Crash" +o Changed 2.0.33 to 2.0.35 (latest stable) +o Added a "BIOS related causes of failure" vv00..3355,, 1144 JJuullyy 11999988 +o Added N440BX Server Board in Motherboards with NO problems +o Added a succes story for GigaByte motherboard with BIOS upgrade +o Added a "How to obtain maximum performance ?" section (waiting for your contributions ;) vv00..3344,, 1100 jjuunnee 11999988 +o Added a "Parallelizing/Optimizing Compilers for 586/686 machines" section in section "Useful Pointers", thanks to SSuummiitt RRooyy +o Corrected a mispelling, "Asus P/I-UP5" is in fact "Asus P/I- P65UP5" vv00..3333,, 33 jjuunnee 11999988 +o Yet another success story for a GigaByte DLX Motherboard. +o A tip for Tyan motherboards, disable the "DRAM Fast Leadoff" BIOS option vv00..3322,, 2277 mmaayy 11999988 +o Asus P/I-UP5 added in the motherboard-with-NO-problem section vv00..3311,, 1188 mmaayy 11999988 +o Elitegroup P6LX2-A works with 2.1.100 and 101 +o Bugs should be reported to linux-smp@vger.rutgers.edu vv00..3300,, 1122 mmaayy 11999988 +o SuperMicro is now in the motherboard-with-NO-problem section vv00..2299,, 1111 mmaayy 11999988 +o A success story for a GigaByte 686 motherboard with 2.1.101 +o Added a new item in the "User Side" section: "Is there any threaded programs or library?" +o OpenGL Mesa library is beeing multithreaded. Cool! See the new section for details. vv00..2288,, 0099 mmaayy 11999988 +o A US mirror of this FAQ is now available (see Introduction) +o Merge of the two confusing Gigabyte 686 entries vv00..2277,, 0055 mmaayy 11999988 +o New info for the Adaptec and TekRam drivers +o Micronics W6-LI motherboard works under SMP 1100.. LLiisstt ooff ccoonnttrriibbuuttoorrss Many thanks to those who help me to maintain this HOWTO: 1. Tigran A. Aivazian 2. John Aldrich 3. Niels Ammerlaan 4. H. Peter Anvin 5. Osamu Aoki 6. Guylhem Aznar 7. Ralf Bchle 8. James Beard 9. Troy Benjegerdes 10. Anton Blanchard 11. Emil Briggs 12. Robert G. Brown 13. Alexandre Charbey 14. Michael Elizabeth Chastain 15. Samuel S. Chessman 16. Alan Cox 17. Andrew Crane 18. Cort Dougan 19. Mark Duguid 20. Stphane colivet 21. Jocelyne Erhel 22. Jay A Estabrook 23. Byron Faber 24. Mark Garlanger 25. hASCII 26. Wade Hampton 27. Andre Hedrick 28. Claus-Justus Heine 29. Benedikt Heinen 30. Florian Hinzmann 31. Moni Hollmann 32. Robert M. Hyatt 33. Jeffrey H. Ingber 34. Richard Jelinek 35. Tony Kocurko 36. Geerten Kuiper 37. Martijn Kruithof 38. Doug Ledford 39. Kumsup Lee 40. Hank Leininger 41. Ryan McCue 42. Paul Mackerras 43. Cameron MacKinnon 44. Joel Marchand 45. David Maslen 46. Chris Mauritz 47. Jean-Francois Micouleau 48. David Miller 49. Ingo Molnar 50. Ulf Nielsen 51. Jakob Oestergaard 52. C Polisher 53. Adrian Portelli 54. Matt Ranney 55. Daniel Roesen 56. Ulf Rompe 57. Jean-Michel Rouet 58. Volker Reichelt 59. Sean Reifschneider 60. Sumit Roy 61. Thomas Schenk 62. Terry Shull 63. Chris K. Skinner 64. Hans - Erik Skyttberg 65. Szakacsits Szabolcs 66. Jukka Tainio 67. Simen Timian Thoresen 68. El Warren 69. Gregory R. Warnes 70. Gero Wedemann 71. Christopher Allen Wing 72. Leonard N. Zubkoff