Next Previous Contents

4. Setting up the Server side

You found all the software you needed. Now let's install them.

4.1 AIX License

Before making the tarball on the aix machine, make sure you run /usr/netstation/bin/agree in order to make the kernel in a usable format. Probably you will have to do the same thing with the tarball you get from the IBM website. So finding the kernel separatly might be another solution. Find a drive with about 25Mb of free diskspace, I use /usr/netstation/, and unpack the tarbal either from the IBM website or from an AIX machine. There is no need in using the approx 60Mb from /usr/netstation/doc on the disk if you don't have enough diskspace.

4.2 The Real Operating System

Setting up the nfs server

Edit your /etc/exports, add the line /usr/netstation 10.0.0.50(rw) Where 10.0.0.50 is the IP address you want to give to the NC. Restart your nfs deamon.

[root@velvet sdog]# ps auxf |grep rpc

sdog 4145 0.0 5.8 828 384 p1 S 03:55 0:00 \_ grep rpc

root 3120 0.0 5.7 944 380 ? S Feb 27 0:00 rpc.mountd

root 3129 0.0 1.5 880 100 ? S Feb 27 0:10 rpc.nfsd

[root@velvet sdog]# kill -9 3120 3129 ; /usr/sbin/rpc.mountd ; /usr/sbin/rpc.nfsd

or on a RedHat-like system easier

[root@velvet init.d]# pwd

/etc/rc.d/init.d

[root@velvet init.d]# ./nfs restart

Restarting NFS services: rpc.nfsd rpc.mountd done.

[root@velvet init.d]#

Your NC should now be able to mount the /usr/netsation by NFS.

Bascially if you don`t need X-Windows this is as far as it gets. You can easily telnet from your NC with nothing more installed. However the beauty of this thing is it`s X capability.

Setting up the X server

Next we have to set up the X server. Basically I didn't need to set up anything, all of my machines that ran X-Windows were configured to accept connections. I just started up the NC for the first time and it showed me all the machines that ran an XDM (cfr running an X -indirect). So any machine that can run xdm can be used as X Server. Just make sure XDM is So any machine that can run xdm can be used as X Server. Just make sure XDM is started.

Everything on the server side should be setup now. Lets try the NC side.


Next Previous Contents