Next Previous Contents

5. CALLING CONVENTIONS

5.1 Linux

Linking to GCC

That's the preferred way. Check GCC docs and examples from Linux kernel .S files that go through gas (not those that go through as86).

32-bit arguments are pushed down stack in reverse syntactic order (hence accessed/popped in the right order), above the 32-bit near return address. %ebp, %esi, %edi, %ebx are callee-saved, other registers are caller-saved; %eax is to hold the result, or %edx:%eax for 64-bit results.

FP stack: I'm not sure, but I think it's result in st(0), whole stack caller-saved.

Note that GCC has options to modify the calling conventions by reserving registers, having arguments in registers, not assuming the FPU, etc. Check the i386 .info pages.

Beware that you must then declare the cdecl or regparm(0) attribute for a function that will follow standard GCC calling conventions. See in the GCC info pages the section: C Extensions::Extended Asm::. See also how Linux defines its asmlinkage macro...

ELF vs a.out problems

Some C compilers prepend an underscore before every symbol, while others do not.

Particularly, Linux a.out GCC does such prepending, while Linux ELF GCC does not.

If you need cope with both behaviors at once, see how existing packages do. For instance, get an old Linux source tree, the Elk, qthreads, or OCaml...

You can also override the implicit C->asm renaming by inserting statements like


        void foo asm("bar") (void);

to be sure that the C function foo will be called really bar in assembly.

Note that the utility objcopy, from the binutils package, should allow you to transform your a.out objects into ELF objects, and perhaps the contrary too, in some cases. More generally, it will do lots of file format conversions.

Direct Linux syscalls

Often you will be told that using libc is the only way, and direct system calls are bad. Believe it, unless of course you're specifically writing your own replacement for the libc, adapted to your specific language or memory requirements or whatever.

But you must know that libc is not sacred, and in most cases libc only does some checks, then calls kernel, and then sets errno. You can easily do this in your program as well (if you need to), and your program will be dozen times smaller, and this will also result in improved performance, just because you're not using shared libraries (static binaries are faster). Using or not using libc in assembly programming is more a question of taste/belief than something practical. Remember, Linux is aiming to be POSIX compliant, so does libc. This means that syntax of almost all libc "system calls" exactly matches syntax of real kernel system calls (and vice versa). Besides, modern libc becomes slower and slower, and eats more and more memory, and so, cases of using direct system calls become quite usual. But.. main drawback of throwing libc away is that possibly you will need to implement several libc specific functions (that are not just syscall wrappers) on your own (printf and Co.).. and you are ready for that, aren't you? :)

Here is summary of direct system calls pros and cons.

Pros:

Cons:

If you've pondered the above pros and cons, and still want to use direct syscalls (as documented in section 2 of the manual pages), then here is some advice.

Basically, you issue an int 0x80, with the __NR_syscallname number (from asm/unistd.h) in eax, and parameters (up to five) in ebx, ecx, edx, esi, edi respectively. Result is returned in eax, with a negative result being an error, whose opposite is what libc would put in errno. The user-stack is not touched, so you needn't have a valid one when doing a syscall.

As for the invocation arguments passed to a process upon startup, the general principle is that the stack originally contains the number of arguments argc, then the list of pointers that constitute *argv, then a null-terminated sequence of null-terminated variable=value strings for the environment. For more details, do examine Linux assembly resources, read the sources of C startup code from your libc (crt0.S or crt1.S), or those from the Linux kernel (exec.c and binfmt_*.c in linux/fs/).

Hardware I/O under Linux

If you want to do direct I/O under Linux, either it's something very simple that needn't OS arbitration, and you should see the IO-Port-Programming mini-HOWTO; or it needs a kernel device driver, and you should try to learn more about kernel hacking, device driver development, kernel modules, etc, for which there are other excellent HOWTOs and documents from the LDP.

Particularly, if what you want is Graphics programming, then do join one of the GGI or XFree86 projects.

Some people have even done better, writing small and robust XFree86 drivers in an interpreted domain-specific language, GAL, and achieving the efficiency of hand C-written drivers through partial evaluation (drivers not only not in asm, but not even in C!). The problem is that the partial evaluator they used to achieve efficiency is not free software. Any taker for a replacement?

Anyway, in all these cases, you'll be better when using GCC inline assembly with the macros from linux/asm/*.h than writing full assembly source files.

Accessing 16-bit drivers from Linux/i386

Such thing is theoretically possible (proof: see how DOSEMU can selectively grant hardware port access to programs), and I've heard rumors that someone somewhere did actually do it (in the PCI driver? Some VESA access stuff? ISA PnP? dunno). If you have some more precise information on that, you'll be most welcome. Anyway, good places to look for more information are the Linux kernel sources, DOSEMU sources (and other programs in the DOSEMU repository), and sources for various low-level programs under Linux... (perhaps GGI if it supports VESA).

Basically, you must either use 16-bit protected mode or vm86 mode.

The first is simpler to setup, but only works with well-behaved code that won't do any kind of segment arithmetics or absolute segment addressing (particularly addressing segment 0), unless by chance it happens that all segments used can be setup in advance in the LDT.

The later allows for more "compatibility" with vanilla 16-bit environments, but requires more complicated handling.

In both cases, before you can jump to 16-bit code, you must

Again, carefully read the source for the stuff contributed to the DOSEMU project, particularly these mini-emulators for running ELKS and/or simple .COM programs under Linux/i386.

5.2 DOS

Most DOS extenders come with some interface to DOS services. Read their docs about that, but often, they just simulate int 0x21 and such, so you do "as if" you are in real mode (I doubt they have more than stubs and extend things to work with 32-bit operands; they most likely will just reflect the interrupt into the real-mode or vm86 handler).

Docs about DPMI (and much more) can be found on ftp://x2ftp.oulu.fi/pub/msdos/programming/ (again, the original x2ftp site is closing (no more?), so use a mirror site).

DJGPP comes with its own (limited) glibc derivative/subset/replacement, too.

It is possible to cross-compile from Linux to DOS, see the devel/msdos/ directory of your local FTP mirror for metalab.unc.edu Also see the MOSS dos-extender from the Flux project from university of Utah.

Other documents and FAQs are more DOS-centered. We do not recommend DOS development.

5.3 Windows and Co.

This HOWTO is not about Windows programming, you can find lots of documents about it everywhere.. The thing you should know is that Cygnus Solutions developed the cygwin32.dll library, for GNU programs to run on Win32 platform. Thus, you can use GCC, GAS, all the GNU tools, and many other Unix applications. Take a look on their webpage.

5.4 Your own OS

Control is what attracts many OS developers to assembly, often is what leads to or stems from assembly hacking. Note that any system that allows self-development could be qualified an "OS", though it can run "on the top" of an underlying system (much like Linux over Mach or OpenGenera over Unix).

Hence, for easier debugging purpose, you might like to develop your "OS" first as a process running on top of Linux (despite the slowness), then use the Flux OS kit (which grants use of Linux and BSD drivers in your own OS) to make it standalone. When your OS is stable, it is time to write your own hardware drivers if you really love that.

This HOWTO will not cover topics such as Boot loader code & getting into 32-bit mode, Handling Interrupts, The basics about Intel protected mode or V86/R86 braindeadness, defining your object format and calling conventions.

The main place where to find reliable information about that all, is source code of existing OSes and bootloaders. Lots of pointers are on the following webpage: http://www.tunes.org/Review/OSes.html


Next Previous Contents